Loading
  • London 10:16 pm

    17°C
     
UltraCap Worldwide Ltd
 + (44) (0)20 3239 4071 | UK
 Tollfree +1-800-471-1978
Kemp House 160 City Road   London EC1V 2NX | UK
 nvd@ultracapacitor.info

Ultra Capacitor

SUPERIOR PERFORMANCE ULTRACAPACITOR TECHNOLOGY

The experimental work over the past two years consisted of three steps.

The first step centred on the development of bulk capacitor ceramics with high capacitance/dielectric constant to be used as reference materials.In contrast to Eestortechnology, which has a very basic low dielectric constant of 18,000 against our latest milestone of 16 million.

The second step centred on the development of high surface area ceramics with improved charge storage capabilities.

The third step will centre on the development dielectric films on metal substrate with good adherence to the metal substrate and possessing no pitting or discontinuities responsible for decrease in capacitance. We will use a novel ultrasound technology for mixing and grain refinement.

The powder was pressed and fired at various temperatures ranging to produce dense non-porous samples.The samples were then electroded and tested for capacitance (C), dielectric constant (K), dielectric loss (loss tan) and temperature coefficient of capacitance (TCC).

Significantly higher dielectric constant thanEestor was achieved with samples as shown in Fig. 1 at the left. (Click image to enlarge).

High surface area


A high surface area is important to prevent electric run away. Extensive work has already been done.

SEM ceramic thin film


A high surface area is important to prevent electric run away. Extensive work has already been done.

Bonding to metal electrodes

The increase in dielectric constant with sintering temperature is believed to be associated with the increase in film density and in the improvement in film adherence/bonding to the metal electrodes.